0%
نغلّف لك التجربة بفيلم 3MWrapping your experience in 3M film
الرئيسية لماذا 3M الخدمات المنتجاتProducts المراكز الضمان الامتياز للشركات تواصل معنا احجز الآن
3M · AUTOMOTIVE

Scotchgard PPF Pro Series 200 Matte

يحوّل صبغ سيارتك اللامع لمظهر مطفي ناعم، مع حماية من الحصى والخدوش وسطح يطرد الماء والأوساخ. Turns glossy paint into a smooth matte finish, with chip and scratch protection and a water- and dirt-repelling surface.

فيلم Scotchgard Pro Series 200 Matte من 3M يعطي سيارتك تشطيب مطفي ناعم ويحمي الصبغ من الحصى والخدوش والحشرات والقار والبقع والأشعة فوق البنفسجية. سطحه طارد للماء والأوساخ فما يحتاج تشميع، وخدوشه الخفيفة تختفي لحالها، وعليه ضمان 10 سنوات للعميل من 3M. Scotchgard PPF Pro Series 200 Matte gives a smooth matte finish and protects paint from stone chips, scratches, bugs, tar, stains and UV. Its hydrophobic surface repels water and dirt, so no waxing is needed; minor scratches self-heal, with a 10-year consumer warranty from 3M.

Scotchgard PPF Pro Series 200 Matte

المميزاتHighlights

  • يحوّل الصبغ اللامع لمظهر مطفي ناعم
  • سطح طارد للماء والأوساخ، وما يحتاج تشميع
  • يحمي من الحصى والخدوش والحشرات والقار والبقع والأشعة فوق البنفسجية
  • يساعد في المحافظة على لون الصبغ
  • إصلاح ذاتي للخدوش الخفيفة
  • ضمان 10 سنوات للعميل (التفاصيل في كرت الضمان)
  • Turns glossy paint into a smooth matte finish
  • Hydrophobic surface repels water and dirt; no waxing needed
  • Protects against stone chips, scratches, bugs, tar, stains and UV
  • Helps maintain the paint colour
  • Self-healing for minor scratches
  • 10-year consumer warranty (details on the warranty card)

ملفات المنتجProduct documents

النشرة الفنية لـ Pro Series 200 Matte (3M، نوفمبر 2023)Pro Series 200 Matte product bulletin (3M, November 2023) PDF · 435 KB · 3M

المواصفات الفنيةTechnical specifications

الخاصيةالقيمة
السماكة (الفيلم مع اللاصق)7.9 mil (0.20 مم)
الخامةبولي يوريثان شفاف
التشطيبمطفي (لمعان 17 على زاوية 60°)
قوة اللصق بعد 24 ساعة4.5 lbs/in (7.9 N/cm)
الاستطالة290%
قوة الشد1,600 PSI (11 MPa)
طريقة التركيبتركيب رطب فقط
PropertyValue
Thickness (film with adhesive)7.9 mil (0.20 mm)
MaterialTransparent polyurethane
FinishMatte (gloss 17 at 60°)
Adhesion after 24 hours4.5 lbs/in (7.9 N/cm)
Elongation290%
Tensile strength1,600 PSI (11 MPa)
ApplicationWet only

قيم استرشادية من نشرة 3M (نوفمبر 2023) وليست للمواصفات التعاقدية. للعناية: منظف رطب غير كاشط درجة حموضته بين 6 و8.Typical values from the 3M bulletin (November 2023), not for specification. Care: a wet, non-abrasive cleaner with pH 6 to 8.

جاهز تركّب Scotchgard PPF Pro Series 200 Matte؟Ready to install Scotchgard PPF Pro Series 200 Matte?

احجز في أقرب مركز Atlas | 3M معتمد، والتركيب بضمان 3M الرسمي. Book at the nearest authorized Atlas | 3M center, installed with the official 3M warranty.

منتجات مشابهةRelated products